diff --git a/etc/apache2.conf.in b/etc/apache2.conf.in deleted file mode 100644 index a05810fdd..000000000 --- a/etc/apache2.conf.in +++ /dev/null @@ -1,460 +0,0 @@ -# DO NOT EDIT THIS FILE, it is generated from etc/apache2.conf.in -# -# Instead, edit etc/apache2/httpd.conf, which is included. -# - -# $Id: apache2.conf.in,v 1.7 2007/03/20 22:12:33 mcr Exp $ - - -# The LockFile directive sets the path to the lockfile used when Apache -# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or -# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at -# its default value. The main reason for changing it is if the logs -# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL -# DISK. The PID of the main server process is automatically appended to -# the filename. - -LockFile run/lock/apache2/accept.lock -ServerName localhost - -# PidFile: The file in which the server should record its process -# identification number when it starts. - -PidFile run/apache2.pid - -# Timeout: The number of seconds before receives and sends time out. - -Timeout 300 - -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. - -KeepAlive On - -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We recommend you leave this number high, for maximum performance. - -MaxKeepAliveRequests 100 - -# KeepAliveTimeout: Number of seconds to wait for the next request from the -# same client on the same connection. - -KeepAliveTimeout 15 - -#User www-data -#Group www-data - -# The following directives define some format nicknames for use with -# a CustomLog directive (see below). -LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%h %l %u %t \"%r\" %>s %b" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - - -# Global error log. -ErrorLog run/log/apache2/error.log - -# Include module configuration directly here. -LoadModule php5_module @PHP5_MODDIR@/libphp5.so - - - LoadModule auth_basic_module @APACHE2_MODDIR@/mod_auth_basic.so - - - LoadModule authz_user_module @APACHE2_MODDIR@/mod_authz_user.so - - - LoadModule authz_host_module @APACHE2_MODDIR@/mod_authz_host.so - - - LoadModule authz_owner_module @APACHE2_MODDIR@/mod_authz_owner.so - - - LoadModule authn_file_module @APACHE2_MODDIR@/mod_authn_file.so - - - - LoadModule alias_module @APACHE2_MODDIR@/mod_alias.so - - - LoadModule dir_module @APACHE2_MODDIR@/mod_dir.so - - - LoadModule include_module @APACHE2_MODDIR@/mod_include.so - - - LoadModule autoindex_module @APACHE2_MODDIR@/mod_autoindex.so - - - LoadModule negotiation_module @APACHE2_MODDIR@/mod_negotiation.so - - - LoadModule setenvif_module @APACHE2_MODDIR@/mod_setenvif.so - - - LoadModule log_config_module @APACHE2_MODDIR@/mod_log_config.so - - - LoadModule mime_module @APACHE2_MODDIR@/mod_mime.so - - - LoadModule ssl_module @APACHE2_MODDIR@/mod_ssl.so - - - LoadModule proxy_module @APACHE2_MODDIR@/mod_proxy.so - - - LoadModule proxy_balancer_module @APACHE2_MODDIR@/mod_proxy_balancer.so - - - LoadModule proxy_connect_module @APACHE2_MODDIR@/mod_proxy_connect.so - - - LoadModule proxy_http_module @APACHE2_MODDIR@/mod_proxy_http.so - - - LoadModule rewrite_module @APACHE2_MODDIR@/mod_rewrite.so - - - LoadModule headers_module @APACHE2_MODDIR@/mod_headers.so - - - -# phpMyAdmin default Apache configuration - -Alias /phpmyadmin @RUNDIR@/phpmyadmin - - - Options Indexes FollowSymLinks - DirectoryIndex index.php - - - AddType application/x-httpd-php .php - - php_flag magic_quotes_gpc Off - php_flag track_vars On - php_flag register_globals Off - php_value include_path . - - - - - - - ProxyRequests Off - - - AddDefaultCharset off - Order deny,allow - Deny from all - #Allow from .example.com - - - - # Enable/disable the handling of HTTP/1.1 "Via:" headers. - # ("Full" adds the server version; "Block" removes all outgoing Via: headers) - # Set to one of: Off | On | Full | Block - - ProxyVia On - - - - AddType application/x-httpd-php .php .phtml .php3 - AddType application/x-httpd-php-source .phps - PHPIniDir @TOPDIR@/etc - - -# Include all the end-user configurations: -#Include apache2/httpd.conf - -#Let's have some Icons, shall we? -Alias /icons/ "/usr/share/apache2/icons/" - - Options Indexes MultiViews - AllowOverride None - Order allow,deny - Allow from all - - -# Set up the default error docs. -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# Putting this all together, we can Internationalize error responses. -# -# We use Alias to redirect any /error/HTTP_.html.var response to -# our collection of by-error message multi-language collections. We use -# includes to substitute the appropriate text. -# -# You can modify the messages' appearance without changing any of the -# default HTTP_.html.var files by adding the line; -# -# Alias /error/include/ "/your/include/path/" -# -# which allows you to create your own set of files by starting with the -# /usr/local/apache2/error/include/ files and -# copying them to /your/include/path/, even on a per-VirtualHost basis. -# - - - - Alias /error/ "/usr/share/apache2/error/" - - - AllowOverride None - Options IncludesNoExec - AddOutputFilter Includes html - AddHandler type-map var - Order allow,deny - Allow from all - LanguagePriority en es de fr - ForceLanguagePriority Prefer Fallback - - - ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var - #ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var - ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var - ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var - ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var - ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var - ErrorDocument 410 /error/HTTP_GONE.html.var - ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var - ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var - ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var - ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var - ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var - ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var - ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var - ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var - ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var - ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var - - - - -DirectoryIndex index.html index.cgi index.pl index.php index.xhtml - -# UserDir is now a module -#UserDir public_html -#UserDir disabled root - -# -# AllowOverride FileInfo AuthConfig Limit -# Options Indexes SymLinksIfOwnerMatch IncludesNoExec -# - -AccessFileName .htaccess - - - Order allow,deny - Deny from all - - -UseCanonicalName Off - -TypesConfig @MIMETYPES@ -DefaultType text/plain - -HostnameLookups Off - -IndexOptions FancyIndexing VersionSort - -AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - -AddIconByType (TXT,/icons/text.gif) text/* -AddIconByType (IMG,/icons/image2.gif) image/* -AddIconByType (SND,/icons/sound2.gif) audio/* -AddIconByType (VID,/icons/movie.gif) video/* - -# This really should be .jpg. - -AddIcon /icons/binary.gif .bin .exe -AddIcon /icons/binhex.gif .hqx -AddIcon /icons/tar.gif .tar -AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv -AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip -AddIcon /icons/a.gif .ps .ai .eps -AddIcon /icons/layout.gif .html .shtml .htm .pdf -AddIcon /icons/text.gif .txt -AddIcon /icons/c.gif .c -AddIcon /icons/p.gif .pl .py -AddIcon /icons/f.gif .for -AddIcon /icons/dvi.gif .dvi -AddIcon /icons/uuencoded.gif .uu -AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl -AddIcon /icons/tex.gif .tex -AddIcon /icons/bomb.gif core - -AddIcon /icons/back.gif .. -AddIcon /icons/hand.right.gif README -AddIcon /icons/folder.gif ^^DIRECTORY^^ -AddIcon /icons/blank.gif ^^BLANKICON^^ - - -# This is from Matty J's patch. Anyone want to make the icons? -#AddIcon /icons/dirsymlink.jpg ^^SYMDIR^^ -#AddIcon /icons/symlink.jpg ^^SYMLINK^^ - -DefaultIcon /icons/unknown.gif - -ReadmeName README.html -HeaderName HEADER.html - -IndexIgnore .??* *~ *# HEADER* RCS CVS *,t - -AddEncoding x-compress Z -AddEncoding x-gzip gz tgz - -AddLanguage da .dk -AddLanguage nl .nl -AddLanguage en .en -AddLanguage et .et -AddLanguage fr .fr -AddLanguage de .de -AddLanguage el .el -AddLanguage it .it -AddLanguage ja .ja -AddLanguage pl .po -AddLanguage ko .ko -AddLanguage pt .pt -AddLanguage no .no -AddLanguage pt-br .pt-br -AddLanguage ltz .ltz -AddLanguage ca .ca -AddLanguage es .es -AddLanguage sv .se -AddLanguage cz .cz -AddLanguage ru .ru -AddLanguage tw .tw -AddLanguage zh-tw .tw - -LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw - - -#AddDefaultCharset ISO-8859-1 - -AddCharset ISO-8859-1 .iso8859-1 .latin1 -AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen -AddCharset ISO-8859-3 .iso8859-3 .latin3 -AddCharset ISO-8859-4 .iso8859-4 .latin4 -AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru -AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb -AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk -AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb -AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk -AddCharset ISO-2022-JP .iso2022-jp .jis -AddCharset ISO-2022-KR .iso2022-kr .kis -AddCharset ISO-2022-CN .iso2022-cn .cis -AddCharset Big5 .Big5 .big5 -# For russian, more than one charset is used (depends on client, mostly): -AddCharset WINDOWS-1251 .cp-1251 .win-1251 -AddCharset CP866 .cp866 -AddCharset KOI8-r .koi8-r .koi8-ru -AddCharset KOI8-ru .koi8-uk .ua -AddCharset ISO-10646-UCS-2 .ucs2 -AddCharset ISO-10646-UCS-4 .ucs4 -AddCharset UTF-8 .utf8 - -AddCharset GB2312 .gb2312 .gb -AddCharset utf-7 .utf7 -AddCharset utf-8 .utf8 -AddCharset big5 .big5 .b5 -AddCharset EUC-TW .euc-tw -AddCharset EUC-JP .euc-jp -AddCharset EUC-KR .euc-kr -AddCharset shift_jis .sjis - -#AddType application/x-httpd-php .php -#AddType application/x-httpd-php-source .phps - -AddType application/x-tar .tgz - -# To use CGI scripts outside /cgi-bin/: -# -#AddHandler cgi-script .cgi - -# To use server-parsed HTML files -# - - SetOutputFilter INCLUDES - - -# If you wish to use server-parsed imagemap files, use -# -#AddHandler imap-file map - -BrowserMatch "Mozilla/2" nokeepalive -BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 -BrowserMatch "RealPlayer 4\.0" force-response-1.0 -BrowserMatch "Java/1\.0" force-response-1.0 -BrowserMatch "JDK/1\.0" force-response-1.0 - -# -# The following directive disables redirects on non-GET requests for -# a directory that does not include the trailing slash. This fixes a -# problem with Microsoft WebFolders which does not appropriately handle -# redirects for folders with DAV methods. -# - -BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully -BrowserMatch "^WebDrive" redirect-carefully -BrowserMatch "^gnome-vfs" redirect-carefully -BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully - -# Allow server status reports, with the URL of http://servername/server-status -# Change the ".your_domain.com" to match your domain to enable. -# -# -# SetHandler server-status -# Order deny,allow -# Deny from all -# Allow from .your_domain.com -# - -# Allow remote server configuration reports, with the URL of -# http://servername/server-info (requires that mod_info.c be loaded). -# Change the ".your_domain.com" to match your domain to enable. -# -# -# SetHandler server-info -# Order deny,allow -# Deny from all -# Allow from .your_domain.com -# - -ServerAdmin webmaster@localhost -ServerName localhost - -DocumentRoot @TOPDIR@/public - - Options FollowSymLinks - AllowOverride None - - - Options FollowSymLinks MultiViews - AllowOverride AuthConfig Indexes - Order allow,deny - allow from all - - -ErrorLog run/log/apache2/error.log - -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -LogLevel warn - -CustomLog run/log/apache2/access.log combined -ServerSignature On - - diff --git a/etc/bootstrap.sql.in b/etc/bootstrap.sql.in deleted file mode 100644 index 60712a58e..000000000 --- a/etc/bootstrap.sql.in +++ /dev/null @@ -1,11 +0,0 @@ -create database @APPNAME@; -create database @APPNAME@_test; -create user migrations identified by '@DBPASSWORD@'; -create user @APPNAME@ identified by '@DBPASSWORD@'; -create user test_@APPNAME@ identified by '@DBPASSWORD@'; -grant all on @APPNAME@.* TO 'migrations'@'%'; -grant all on @APPNAME@.* TO '@APPNAME@'@'%'; -grant all on test_@APPNAME@.* TO '@APPNAME@'@'%'; -grant all on @APPNAME@_test.* TO 'test_@APPNAME@'@'%'; - --- INSERT INTO auth_user VALUES (999412, 'admin', '', '', 'admin@example.com', 'sha1$48cf6$be9eb63ed0c17db7afdc8c2835f95f1ab93a30e9', true, true, true, '2011-12-09 16:03:28.471308-05', '2011-12-09 16:03:28.471308-05'); diff --git a/etc/config.inc.php.in b/etc/config.inc.php.in deleted file mode 100644 index b9e93a5bb..000000000 --- a/etc/config.inc.php.in +++ /dev/null @@ -1,42 +0,0 @@ - - diff --git a/etc/fixup.sh b/etc/fixup.sh deleted file mode 100755 index 7d3880a65..000000000 --- a/etc/fixup.sh +++ /dev/null @@ -1,91 +0,0 @@ -#!/bin/sh -# this is a shell script to create a local configuration for Apache to run -# with PHP and MYSQL. -# -# this is based upon work in the ircan.gc.ca's ITERation project. -# - -while [ ! -d ietf ] -do - cd .. -done - -if [ -d ietf ] -then - TOPDIR=$(pwd) -else - echo it seems that I can not find the top-level htdocs - exit 2 -fi - -PORT=$(./etc/portnum.sh) -VERSION=1 - -export LANG=C -export LC_TIME=C - -APACHE2_MODDIR=$(if [ -d /usr/lib/apache2/modules ]; then echo /usr/lib/apache2/modules; else echo WHERE IS APACHE; fi; ) -WEBSERVER=$(if [ -x /usr/sbin/httpd2 ]; then echo /usr/sbin/httpd2; elif [ -x /usr/sbin/apache2 ]; then echo /usr/sbin/apache2; fi) -PHP5_MODDIR=${APACHE2_MODDIR} -CONFFILES="apache2.conf php.ini runweb.sh" -SYSTEMPORT=$(./etc/portnum.sh ) -IPADDRESS=127.0.0.1 -MIMETYPES=$(if [ -f /etc/apache2/mime.types ]; then echo /etc/apache2/mime.types; elif [ -f /etc/mime.types ]; then echo /etc/mime.types; fi) -SYSTEMURL=$(echo 'http://localhost:'${SYSTEMPORT}'/') -SECRETSECRET=$(pwgen 16 1) -RUNDIR=${TOPDIR}/run -SOCKET=${RUNDIR}/mysqld.sock -SCRIPTDIR=etc - -# keep this constant to avoid churn. Output from pwgen 16 1 -DBPASSWORD=ing9aGha8Ga0geaj - -# now create all the relevant files. - -localize() { - file=$1 - echo Processing $file - sed -e 's,@TOPDIR@,'${TOPDIR}',g' \ - -e 's,@APACHE2_MODDIR@,'${APACHE2_MODDIR}',g' \ - -e 's,@WEBSERVER@,'${WEBSERVER}',g' \ - -e 's,@MIMETYPES@,'${MIMETYPES}',g' \ - -e 's,@SECRETSECRET@,'${SECRETSECRET}',g' \ - -e 's,@RUNDIR@,'${RUNDIR}',g' \ - -e 's,@SCRIPTDIR@,'${SCRIPTDIR}',g' \ - -e 's,@SOCKET@,'${SOCKET}',g' \ - -e 's,@APPNAME@,'ietfdb',g' \ - -e 's,@DBPASSWORD@,'${DBPASSWORD}',g' \ - -e 's,@DBPATH@,'${SOCKET}',g' \ - -e 's,@PHP5_MODDIR@,'${PHP5_MODDIR}',g' \ - $file.in >$file - if [ -x $file.in ]; then chmod +x $file; fi -} - -mkdir -p $TOPDIR/run/log -mkdir -p $TOPDIR/run/log/apache2 -mkdir -p $TOPDIR/run/lock -mkdir -p $TOPDIR/log -mkdir -p $TOPDIR/django_cache - -localize etc/apache2.conf -localize etc/runweb.sh -localize etc/php.ini -localize etc/shutit.sh -localize etc/initdb.sh -localize etc/rundb.sh -localize etc/shutdb.sh -localize etc/shutit.sh -localize etc/config.inc.php -localize etc/mysql.sh -localize etc/bootstrap.sql -localize etc/settings_local.py - -# writable directories required by settings file. -mkdir -p tmp/staging - -cp etc/settings_local.py ietf - -if [ -f php/install-settings.php.in ]; then - localize php/install-settings.php -fi - diff --git a/etc/hack_mcr_to_secretariat.py b/etc/hack_mcr_to_secretariat.py deleted file mode 100644 index 2392f0736..000000000 --- a/etc/hack_mcr_to_secretariat.py +++ /dev/null @@ -1,11 +0,0 @@ -from ietf.person.models import Person, Email -from ietf.name.models import RoleName -from ietf.group.models import Group - -mcr = Person.objects.get(pk=102254) -secr = RoleName.objects.get(pk="secr") -secretariat = Group.objects.get(pk=4) -email = Email(address = "orlando@credil.org", person=mcr, active=True) -email.save() -mcr.role_set.create(name=secr, email=email, group=secretariat) - diff --git a/etc/initdb.sh.in b/etc/initdb.sh.in deleted file mode 100755 index 6e3044c8b..000000000 --- a/etc/initdb.sh.in +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/bash - -TOPDIR=@TOPDIR@ -RUNDIR=${TOPDIR}/run -LOGDIR=${TOPDIR}/log -DBDIR=${RUNDIR}/db -PIDFILE=${RUNDIR}/mysqld.pid -SOCKET=${RUNDIR}/mysqld.sock -if [ -d /usr/local/mysql ]; then - BASEDIR=/usr/local/mysql -else - BASEDIR=/usr -fi - -mkdir -p ${RUNDIR}/mysqld -mkdir -p ${TOPDIR}/db/mysql -mkdir -p ${LOGDIR}/mysql -PATH=${BASEDIR}/scripts:${BASEDIR}/bin:$PATH export PATH - -mysql_install_db --no-defaults --basedir=${BASEDIR} --datadir=${DBDIR} --pid-file=${PIDFILE} --skip-external-locking --socket=${SOCKET} --log_bin=${LOGDIR}/mysql/mysql-bin.log - -echo ${SOCKET} >.mysql.socket - -# now start the DB. -# have to start up mysql with TCP networking enabled! -mysqld --basedir=${BASEDIR} --datadir=${DBDIR} --pid-file=${PIDFILE} --skip-external-locking --socket=${SOCKET} --port=3307 --log_bin=${LOGDIR}/mysql/mysql-bin.log --default-storage-engine=InnoDB & -sleep 10 - -connargs="--protocol=socket --socket=${SOCKET} " - -( echo "update user set host='%' where host='localhost';" - echo "update user set password=PASSWORD('Ahw3ooh2') where user='root';" - echo "FLUSH PRIVILEGES;" ) | mysql -h 127.0.0.1 --port=3307 -u root mysql - -echo TRYING new PW. "(do \q twice)" -mysql -h 127.0.0.1 --port=3307 -u root --password='Ahw3ooh2' mysql -mysql $connargs -u root --password='Ahw3ooh2' mysql - -sleep 10 - -if [ -f etc/bootstrap.sql ]; then - cat etc/bootstrap.sql | mysql -h 127.0.0.1 --port=3307 -u root --password='Ahw3ooh2' mysql -fi - -sleep 10 - -( -echo "FLUSH PRIVILEGES;" -) | mysql -h 127.0.0.1 --port=3307 -u root --password='Ahw3ooh2' mysql - -mysqladmin -h 127.0.0.1 --port=3307 -u root --password=Ahw3ooh2 shutdown - diff --git a/etc/mysql.sh.in b/etc/mysql.sh.in deleted file mode 100755 index 09dd99085..000000000 --- a/etc/mysql.sh.in +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh - -TOPDIR=@TOPDIR@ -RUNDIR=${TOPDIR}/run -LOGDIR=${TOPDIR}/log -SOCKET=${RUNDIR}/mysqld.sock -PIDFILE=${RUNDIR}/mysqld.pid -mkdir -p ${RUNDIR}/mysqld -mkdir -p ${TOPDIR}/db/mysql -mkdir -p ${LOGDIR}/mysql -if [ -d /usr/local/mysql ]; then - BASEDIR=/usr/local/mysql -else - BASEDIR=/usr -fi - -PATH=/usr/local/mysql/bin:$PATH export PATH -connargs="--protocol=socket --socket=${SOCKET} " -mysql $connargs -u root --password='Ahw3ooh2' ietfdb $* - - diff --git a/etc/nonits b/etc/nonits deleted file mode 100755 index bbb7bf5b8..000000000 --- a/etc/nonits +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh - -echo " Summary: 0 errors" -echo " No nits found" -true diff --git a/etc/php.ini.in b/etc/php.ini.in deleted file mode 100644 index e8eadab20..000000000 --- a/etc/php.ini.in +++ /dev/null @@ -1,1075 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; -; This is the recommended, PHP 4-style version of the php.ini-dist file. It -; sets some non standard settings, that make PHP more efficient, more secure, -; and encourage cleaner coding. -; The price is that with these settings, PHP may be incompatible with some -; applications, and sometimes, more difficult to develop with. Using this -; file is warmly recommended for production sites. As all of the changes from -; the standard settings are thoroughly documented, you can go over each one, -; and decide whether you want to use it or not. -; -; For general information about the php.ini file, please consult the php.ini-dist -; file, included in your PHP distribution. -; -; This file is different from the php.ini-dist file in the fact that it features -; different values for several directives, in order to improve performance, while -; possibly breaking compatibility with the standard out-of-the-box behavior of -; PHP 3. Please make sure you read what's different, and modify your scripts -; accordingly, if you decide to use this file instead. -; -; - register_globals = Off [Security, Performance] -; Global variables are no longer registered for input data (POST, GET, cookies, -; environment and other server variables). Instead of using $foo, you must use -; you can use $_REQUEST["foo"] (includes any variable that arrives through the -; request, namely, POST, GET and cookie variables), or use one of the specific -; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending -; on where the input originates. Also, you can look at the -; import_request_variables() function. -; Note that register_globals is going to be depracated (i.e., turned off by -; default) in the next version of PHP, because it often leads to security bugs. -; Read http://php.net/manual/en/security.registerglobals.php for further -; information. -; - display_errors = Off [Security] -; With this directive set to off, errors that occur during the execution of -; scripts will no longer be displayed as a part of the script output, and thus, -; will no longer be exposed to remote users. With some errors, the error message -; content may expose information about your script, web server, or database -; server that may be exploitable for hacking. Production sites should have this -; directive set to off. -; - log_errors = On [Security] -; This directive complements the above one. Any errors that occur during the -; execution of your script will be logged (typically, to your server's error log, -; but can be configured in several ways). Along with setting display_errors to off, -; this setup gives you the ability to fully understand what may have gone wrong, -; without exposing any sensitive information to remote users. -; - output_buffering = 4096 [Performance] -; Set a 4KB output buffer. Enabling output buffering typically results in less -; writes, and sometimes less packets sent on the wire, which can often lead to -; better performance. The gain this directive actually yields greatly depends -; on which Web server you're working with, and what kind of scripts you're using. -; - register_argc_argv = Off [Performance] -; Disables registration of the somewhat redundant $argv and $argc global -; variables. -; - magic_quotes_gpc = Off [Performance] -; Input data is no longer escaped with slashes so that it can be sent into -; SQL databases without further manipulation. Instead, you should use the -; function addslashes() on each input element you wish to send to a database. -; - variables_order = "GPCS" [Performance] -; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access -; environment variables, you can use getenv() instead. -; - error_reporting = E_ALL [Code Cleanliness, Security(?)] -; By default, PHP surpresses errors of type E_NOTICE. These error messages -; are emitted for non-critical errors, but that could be a symptom of a bigger -; problem. Most notably, this will cause error messages about the use -; of uninitialized variables to be displayed. -; - allow_call_time_pass_reference = Off [Code cleanliness] -; It's not possible to decide to force a variable to be passed by reference -; when calling a function. The PHP 4 style to do this is by making the -; function require the relevant argument by reference. - - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -engine = On - -; Allow the tags are recognized. -; NOTE: Using short tags should be avoided when developing applications or -; libraries that are meant for redistribution, or deployment on PHP -; servers which are not under your control, because short tags may not -; be supported on the target server. For portable, redistributable code, -; be sure not to use short tags. -short_open_tag = On - -; Allow ASP-style <% %> tags. -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -y2k_compliance = On - -; Output buffering allows you to send header lines (including cookies) even -; after you send body content, at the price of slowing PHP's output layer a -; bit. You can enable output buffering during runtime by calling the output -; buffering functions. You can also enable output buffering for all files by -; setting this directive to On. If you wish to limit the size of the buffer -; to a certain size - you can use a maximum number of bytes instead of 'On', as -; a value for this directive (e.g., output_buffering=4096). -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few handreds bytes each as a result of compression. -; If you want larger chunk size for better performence, enable output_buffering -; also. -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -zlib.output_compression = Off - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. -; A warning appears if the specified function is not defined, or if the -; function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func= - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 100 - -; Whether to enable the ability to force arguments to be passed by reference -; at function call time. This method is deprecated and is likely to be -; unsupported in future versions of PHP/Zend. The encouraged method of -; specifying which arguments should be passed by reference is in the function -; declaration. You're encouraged to try and turn this option Off and make -; sure your scripts work properly with it in order to ensure they will work -; with future versions of the language (you will receive a warning each time -; you use this feature, and the argument will be passed by value instead of by -; reference). -allow_call_time_pass_reference = Off - -; -; Safe Mode -; -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -safe_mode_include_dir = @TOPDIR@/php - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - - -; -; Misc -; -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -expose_php = On - - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -max_execution_time = 30 ; Maximum execution time of each script, in seconds -max_input_time = 60 ; Maximum amount of time each script may spend parsing request data -memory_limit = 8M ; Maximum amount of memory a script may consume (8MB) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; error_reporting is a bit-field. Or each number up to get desired error -; reporting level -; E_ALL - All errors and warnings -; E_ERROR - fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; -; Examples: -; -; - Show all errors, except for notices -; -;error_reporting = E_ALL & ~E_NOTICE -; -; - Show only errors -; -;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR -; -; - Show all errors -; -error_reporting = E_ALL - -; Print out errors (as a part of the output). For production web sites, -; you're strongly encouraged to turn this feature off, and use error logging -; instead (see below). Keeping display_errors enabled on a production web site -; may reveal security information to end users, such as file paths on your Web -; server, your database schema or other information. -display_errors = Off - -; Even when display_errors is on, errors that occur during PHP's startup -; sequence are not displayed. It's strongly recommended to keep -; display_startup_errors off, except for when debugging. -display_startup_errors = Off - -; Log errors into a log file (server-specific log, stderr, or error_log (below)) -; As stated above, you're strongly advised to use error logging in place of -; error displaying on production web sites. -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line until ignore_repeated_source is set true. -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; sourcelines. -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -report_memleaks = On - -; Store the last error/warning message in $php_errormsg (boolean). -track_errors = Off - -; Disable the inclusion of HTML tags in error messages. -;html_errors = Off - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://www.php.net/docs.php -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. -;docref_root = "/phpmanual/" -;docref_ext = .html - -; String to output before an error message. -;error_prepend_string = "" - -; String to output after an error message. -;error_append_string = "" - -; Log errors to specified file. -;error_log = filename - -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; -; -; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 - -; The separator used in PHP generated URLs to separate arguments. -; Default is "&". -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; Default is "&". -; NOTE: Every character in this directive is considered as separator! -;arg_separator.input = ";&" - -; This directive describes the order in which PHP registers GET, POST, Cookie, -; Environment and Built-in variables (G, P, C, E & S respectively, often -; referred to as EGPCS or GPC). Registration is done from left to right, newer -; values override older values. -variables_order = "GPCS" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. This makes most sense when coupled with track_vars - in which -; case you can access all of the GPC variables through the $HTTP_*_VARS[], -; variables. -; -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -register_globals = Off - -; This directive tells PHP whether to declare the argv&argc variables (that -; would contain the GET information). If you don't use these variables, you -; should turn it off for increased performance. -register_argc_argv = Off - -; Maximum size of POST data that PHP will accept. -post_max_size = 8M - -; This directive is deprecated. Use variables_order instead. -gpc_order = "GPC" - -; Magic quotes -; - -; Magic quotes for incoming GET/POST/Cookie data. -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -magic_quotes_sybase = Off - -; Automatically add files before or after any PHP document. -auto_prepend_file = -auto_append_file = - -; As of 4.0b4, PHP always outputs a character encoding by default in -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -default_mimetype = "text/html" -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. -;always_populate_raw_post_data = On - - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = "@TOPDIR@/test/php:@TOPDIR@/php:@TOPDIR@/public/php:." -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -doc_root = - -; The directory under which PHP opens the script using /~usernamem used only -; if nonempty. -user_dir = - -; Directory in which the loadable extensions (modules) reside. -;extension_dir = "./" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -enable_dl = On - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. -; cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; cgi.redirect_status_env = ; - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is zero. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; fastcgi.impersonate = 1; - -; Disable logging through FastCGI connection -; fastcgi.log = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -;cgi.rfc2616_headers = 0 - - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -upload_max_filesize = 2M - - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -allow_url_fopen = On - -; Define the anonymous ftp password (your email address) -;from="john@doe.com" - -; Define the user agent for php to send -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; auto_detect_line_endings = Off - - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; -; -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; Note that it should be the name of the module only; no directory information -; needs to go here. Specify the location of the extension with the -; extension_dir directive above. - -; Example lines: - -;extension=pgsql.so -;extension=gd.so - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -define_syslog_variables = Off - -[mail function] -; For Win32 only. -SMTP = localhost -smtp_port = 25 - -; For Win32 only. -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -;sendmail_path = - -[Java] -;java.class.path = .\php_java.jar -;java.home = c:\jdk -;java.library = c:\jdk\jre\bin\hotspot\jvm.dll -;java.library.path = .\ - -[SQL] -sql.safe_mode = Off - -[ODBC] -;odbc.default_db = Not yet implemented -;odbc.default_user = Not yet implemented -;odbc.default_pw = Not yet implemented - -; Allow or prevent persistent links. -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of uodbc.defaultlrl and uodbc.defaultbinmode -odbc.defaultbinmode = 1 - -[MySQL] -; Allow or prevent persistent links. -mysql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -mysql.default_socket = @TOPDIR@/run/mysqld.sock - -; Default host for mysql_connect() (doesn't apply in safe mode). -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -mysql.trace_mode = Off - -[mSQL] -; Allow or prevent persistent links. -msql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -msql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -msql.max_links = -1 - -[PostgresSQL] -; Allow or prevent persistent links. -;pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -;pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -;pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -;pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -;pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Noitce message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -;pgsql.log_notice = 0 - -[Sybase] -; Allow or prevent persistent links. -sybase.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybase.max_links = -1 - -;sybase.interface_file = "/usr/sybase/interfaces" - -; Minimum error severity to display. -sybase.min_error_severity = 10 - -; Minimum message severity to display. -sybase.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -; If on, this will cause PHP to automatically assign types to results according -; to their Sybase type, instead of treating them all as strings. This -; compatibility mode will probably not stay around forever, so try applying -; whatever necessary changes to your code, and turn it off. -sybase.compatability_mode = Off - -[Sybase-CT] -; Allow or prevent persistent links. -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybct.max_links = -1 - -; Minimum server message severity to display. -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -sybct.min_client_severity = 10 - -[dbx] -; returned column names can be converted for compatibility reasons -; possible values for dbx.colnames_case are -; "unchanged" (default, if not set) -; "lowercase" -; "uppercase" -; the recommended default is either upper- or lowercase, but -; unchanged is currently set for backwards compatibility -dbx.colnames_case = "lowercase" - -[bcmath] -; Number of decimal digits for all bcmath functions. -bcmath.scale = 0 - -[browscap] -;browscap = extra/browscap.ini - -[Informix] -; Default host for ifx_connect() (doesn't apply in safe mode). -ifx.default_host = - -; Default user for ifx_connect() (doesn't apply in safe mode). -ifx.default_user = - -; Default password for ifx_connect() (doesn't apply in safe mode). -ifx.default_password = - -; Allow or prevent persistent links. -ifx.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ifx.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ifx.max_links = -1 - -; If on, select statements return the contents of a text blob instead of its id. -ifx.textasvarchar = 0 - -; If on, select statements return the contents of a byte blob instead of its id. -ifx.byteasvarchar = 0 - -; Trailing blanks are stripped from fixed-length char columns. May help the -; life of Informix SE users. -ifx.charasvarchar = 0 - -; If on, the contents of text and byte blobs are dumped to a file instead of -; keeping them in memory. -ifx.blobinfile = 0 - -; NULL's are returned as empty strings, unless this is set to 1. In that case, -; NULL's are returned as string 'NULL'. -ifx.nullformat = 0 - -[Session] -; Handler used to store/retrieve data. -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -;session.save_path = /var/lib/php4 - -; Whether to use cookies. -session.use_cookies = 1 - -; This option enables administrators to make their users invulnerable to -; attacks which involve passing session ids in URLs; defaults to 0. -; session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -session.name = PHPSESSID - -; Initialize session on request startup. -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -session.cookie_path = / - -; The domain for which the cookie is valid. -session.cookie_domain = - -; Handler used to serialize data. php is the standard serializer of PHP. -session.serialize_handler = php - -; Define the probability that the 'garbage collection' process is started -; on every session initialization. -; The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts -; on each request. - -; This is disabled in the Debian packages, due to the strict permissions -; on /var/lib/php4. Instead of setting this here, see the cronjob at -; /etc/cron.d/php4, which uses the session.gc_maxlifetime setting below -;session.gc_probability = 0 -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -session.gc_maxlifetime = 1440 - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, albeit register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. - -session.bug_compat_42 = 0 -session.bug_compat_warn = 1 - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -session.referer_check = - -; How many bytes to read from the file. -session.entropy_length = 0 - -; Specified here to create the session id. -session.entropy_file = - -;session.entropy_length = 16 - -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects. -; or leave this empty to avoid sending anti-caching headers. -session.cache_limiter = nocache - -; Document expires after n minutes. -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publically accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -session.use_trans_sid = 0 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -[Assertion] -; Assert(expr); active by default. -;assert.active = On - -; Issue a PHP warning for each failed assertion. -;assert.warning = On - -; Don't bail out by default. -;assert.bail = Off - -; User-function to be called if an assertion fails. -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -;assert.quiet_eval = 0 - -[Ingres II] -; Allow or prevent persistent links. -ingres.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ingres.max_persistent = -1 - -; Maximum number of links, including persistents. -1 means no limit. -ingres.max_links = -1 - -; Default database (format: [node_id::]dbname[/srv_class]). -ingres.default_database = - -; Default user. -ingres.default_user = - -; Default password. -ingres.default_password = - -[Verisign Payflow Pro] -; Default Payflow Pro server. -pfpro.defaulthost = "test-payflow.verisign.com" - -; Default port to connect to. -pfpro.defaultport = 443 - -; Default timeout in seconds. -pfpro.defaulttimeout = 30 - -; Default proxy IP address (if required). -;pfpro.proxyaddress = - -; Default proxy port. -;pfpro.proxyport = - -; Default proxy logon. -;pfpro.proxylogon = - -; Default proxy password. -;pfpro.proxypassword = - -[com] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -;com.typelib_file = -; allow Distributed-COM calls -;com.allow_dcom = true -; autoregister constants of a components typlib on com_load() -;com.autoregister_typelib = true -; register constants casesensitive -;com.autoregister_casesensitive = false -; show warnings on duplicate constat registrations -;com.autoregister_verbose = true - -[Printer] -;printer.default_printer = "" - -[mbstring] -; language for internal character representation. -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -;mbstring.func_overload = 0 - -[FrontBase] -;fbsql.allow_persistent = On -;fbsql.autocommit = On -;fbsql.default_database = -;fbsql.default_database_password = -;fbsql.default_host = -;fbsql.default_password = -;fbsql.default_user = "_SYSTEM" -;fbsql.generate_warnings = Off -;fbsql.max_connections = 128 -;fbsql.max_links = 128 -;fbsql.max_persistent = -1 -;fbsql.max_results = 128 -;fbsql.batchSize = 1000 - -[Crack] -; Modify the setting below to match the directory location of the cracklib -; dictionary files. Include the base filename, but not the file extension. -; crack.default_dictionary = "c:\php\lib\cracklib_dict" - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -;exif.encode_unicode = ISO-8859-15 -;exif.decode_unicode_motorola = UCS-2BE -;exif.decode_unicode_intel = UCS-2LE -;exif.encode_jis = -;exif.decode_jis_motorola = JIS -;exif.decode_jis_intel = JIS - -; Local Variables: -; tab-width: 4 -; End: diff --git a/etc/portnum.sh b/etc/portnum.sh deleted file mode 100755 index 6b252fb1c..000000000 --- a/etc/portnum.sh +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/sh - -PORT=$(( $(id -u) + 7000 )) -echo $PORT - - diff --git a/etc/rundb.sh.in b/etc/rundb.sh.in deleted file mode 100755 index 91be91800..000000000 --- a/etc/rundb.sh.in +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh - -TOPDIR=@TOPDIR@ -RUNDIR=${TOPDIR}/run -DBDIR=${RUNDIR}/db -LOGDIR=${RUNDIR}/log -SOCKET=${RUNDIR}/mysqld.sock -PIDFILE=${RUNDIR}/mysqld.pid -mkdir -p ${RUNDIR}/mysqld -mkdir -p ${TOPDIR}/db/mysql -mkdir -p ${LOGDIR}/mysql -if [ -d /usr/local/mysql ]; then - BASEDIR=/usr/local/mysql -else - BASEDIR=/usr -fi - -mkdir -p ${LOGDIR}/mysql - -PATH=/usr/local/mysql/bin:$PATH export PATH -mysqld --basedir=${BASEDIR} --datadir=${DBDIR} --pid-file=${PIDFILE} --skip-external-locking --socket=${SOCKET} --skip-networking --general_log=${LOGDIR}/mysql-query.log --transaction-isolation=READ-COMMITTED --default-storage-engine=InnoDB --skip-sync-frm=OFF& - -#--default-table-type=innodb -#[mysqld] -#default-table-type=innodb -#transaction-isolation=READ-COMMITTED -#default-character-set=utf8 -#skip-sync-frm=OFF \ No newline at end of file diff --git a/etc/runweb.sh.in b/etc/runweb.sh.in deleted file mode 100755 index fa9b23a06..000000000 --- a/etc/runweb.sh.in +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/sh - -ServerRoot=@TOPDIR@ -ScriptDir=$ServerRoot/@SCRIPTDIR@ -PORT=$($ServerRoot/etc/portnum.sh) -WEBSERVER=${WEBSERVER-@WEBSERVER@} - -if [ ! -x ${WEBSERVER} ]; then - if [ -x /usr/sbin/httpd2 ]; then - WEBSERVER=/usr/sbin/httpd2 - else - echo NO web server found at $WEBSERVER - exit 10 - fi -fi - -if [ -d /usr/share/phpmyadmin ]; then - mkdir -p $ServerRoot/run/phpmyadmin - (cd $ServerRoot/run/phpmyadmin; - ln -f -s /usr/share/phpmyadmin/* . - rm -f config.inc.php - cp $ScriptDir/config.inc.php . ) -fi - -mkdir -p $ServerRoot/run/lock/apache2 -mkdir -p $ServerRoot/run/log/apache2 - -echo Starting web server on port $PORT -$WEBSERVER -f ${ScriptDir}/apache2.conf -d $ServerRoot -C 'User '$USER -C 'Listen 127.0.0.1:'$PORT - -# for applications which use Rails too. -#echo Now starting mongrel cluster on port 9000/9001. -#echo NOTE: started in DEVELOPMENT mode. - -#$ServerRoot/script/process/spawner mongrel -p 9000 -i 2 -a 127.0.0.1 - - diff --git a/etc/settings_local.py.in b/etc/settings_local.py.in deleted file mode 100644 index 64f8bcaea..000000000 --- a/etc/settings_local.py.in +++ /dev/null @@ -1,32 +0,0 @@ -DATABASES = { - 'default' : { - 'ENGINE' : 'django.db.backends.mysql', - 'NAME' : '@APPNAME@', - 'USER' : '@APPNAME@', - 'PASSWORD' : '@DBPASSWORD@', - 'HOST' : '@DBPATH@', - 'PORT' : '', - - 'TEST_ENGINE' : 'django.db.backends.mysql', - 'TEST_NAME' : 'test_@APPNAME@', - 'TEST_USER' : 'test_@APPNAME@', - 'TEST_PASSWORD' : '@DBPASSWORD@', - 'TEST_HOST' : '@DBPATH@', - 'TEST_PORT' : '', - } -} - -# Make this unique, and don't share it with anybody. -SECRET_KEY = '@SECRETSECRET@' -CACHE_BACKEND = 'file:///@TOPDIR@/django_cache' -DATABASE_TEST_OPTIONS = { 'init_command': 'SET storage_engine=InnoDB', } - -import logging -logging.basicConfig(filename='@TOPDIR@/ajax.log', - level=logging.DEBUG) - -IDSUBMIT_IDNITS_BINARY = '@TOPDIR@/etc/nonits' -IDSUBMIT_STAGING_PATH = '@TOPDIR@/tmp/staging' -USE_NEW_PYTHON_MAGIC = True - -TEMPLATE_STRING_IF_INVALID = "****** SOMETHING WENT WRONG ******" diff --git a/etc/shutdb.sh.in b/etc/shutdb.sh.in deleted file mode 100755 index 69b635449..000000000 --- a/etc/shutdb.sh.in +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/sh - -TOPDIR=@TOPDIR@ -RUNDIR=${TOPDIR}/run -LOGDIR=${TOPDIR}/log -PIDFILE=${RUNDIR}/mysqld.pid -SOCKET=${RUNDIR}/mysqld.sock -if [ -d /usr/local/mysql ]; then - BASEDIR=/usr/local/mysql -else - BASEDIR=/usr -fi - -mysqladmin --protocol=socket --socket=${SOCKET} -u root --password=Ahw3ooh2 shutdown - diff --git a/etc/shutit.sh.in b/etc/shutit.sh.in deleted file mode 100755 index 4c6bc4945..000000000 --- a/etc/shutit.sh.in +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh - -ServerRoot=@TOPDIR@ -[ -f $ServerRoot/run/apache2.pid ] && kill `cat $ServerRoot/run/apache2.pid` -